ASEM SR 85, Руководство по обслуживанию

Страница: 116 / 125

3.2.6 Control Command
- continue
GS ( F pL pH m aL aH bL bH (m = 112)
Function 112
[Name] Specifies the black mark paper format
[Format] ASCII GS ( F pL pH m nL nH bL bH
Hex 1D 28 46 pL pH m nL nH bL bH
Decimal 29 40 70 pL pH m nL nH bL bH
[Range] (pL + pH × 256) = 5 (pL = 5, pH = 0)
m = 112
aL = 141, aH = 0
0 ≤ (bL + bH × 256) ≤ 65535 (0 ≤ bL ≤ 255, 0 ≤ bH ≤ 255)
[Default] bL = 20, bH = 11 (BM interval (top of a BM ~ top of next BM): 400 mm)
[Description] This command sets the black mark paper format.
• pL, pH specifies (pL + pH × 256) as the number of bytes after pH (m, aL, aH,bL, bH).
• bL, bH specifies as [(bL + bH × 256) × vertical motion units] as the BM interval.
[Remarks] The BM interval ranges from 40 to 400 mm.
If the BM interval specified is out of range, this command is ignored.
GS <
[Name] Black mark initialization
[Format] ASCII GS <
Hex 1D 3C
Decimal 29 60
[Description] This command performs the black mark initialization.
[Remarks] This command initializes the values specified by the black mark control command GS ( F.
• paper cutting position, black mark paper format.
The initialized values are the same as the ones that are set when the power is turned on.
SR 85 - Service Manual