ASEM SR 85, Руководство по обслуживанию

Страница: 124 / 125

4.6 Roller assy Block
1. Remove the two Poly washers(
①
) and separate the t wo
gears( ,
② ③
).
2. Separate the E-RING(
④
) and separate the two
Bushings(
⑤
) and Roller (
⑥
).
3. Separate the E-RING(
⑦
) and separate the Shaft-Hinge(
⑧
).
4. Separate the BRKT-Lock(
⑨
) and Separate the two
springs(
⑩
) and Frame-Roller(
⑪
).
5. Separate the Fixed-Blade(
⑫
) and three springs(
⑬
).
6. Separate the Plate-GND( ) From the Fixed-Blade(
⑫
).
4.7 Printer Block
.
1. Remove the four screws(
①
) and separate the Cover-Frame(
②
).
2. Separate the Rack gear-Cutter(
③
) and Movable-Blade(
④
).
3. Separate the Hol der Cover-Sensor(
⑨
) and Separate the
gears(
⑤⑥⑦⑧⑩
).
4. Remove the Po ly washer(
⑪
) and separate the gear(
⑫
),
spring(
⑬
), Assy cutter gear(
⑭
).
5. Remove the two screws( ) and separate the Auto Cutter-
Motor( ).
6. Remove the two screws( ) and separate the
Feed-Motor( ).
SR 85 - Service Manual