ASEKO s.r.o., Vídeňská 340, 25242 Vestec u Prahy
Tel. 244 912 210
Fax 244 910 800
http://www.aseko.cz
Fig. 3. The electrolyzer
Taking into operation
ASIN Salt can be operated either separately (the electrolysis is started together with the filtration plant) or in
connection with the regulator ASIN Aqua S. The relevent alternative must be adjusted in ASIN Salt: After removing
the front cover use the blue switch
– in case of the separate operation the contacts must be in the position ON.
We recommend you to put the system in operation in clean chlorinated water.
ASIN Salt only starts to produce sufficient quantities of the disinfection agent in a few hours. As for the first chlori-
nation the need of the disinfection agent is significantly higher than during stable operation, it may happen that
ASIN Salt will not achieve the required concentration of the disinfection agent. This is why we recommend you to
chlorinate the pool water by pouring approx. 30 ml of the chlorine disinfection agent per m3 of water volume. If the
volume of your pool is 40 m3, pour approx. 30 x 40 = 1200 ml into the swimming pool.
Add 4 kg of salt per m3
of pool water. For example: the dimensions of your swimming pool are 4 m x 10 m and the
depth of water 1 m. It means that its volume is 4 x 10 x 1 = 40 m3. The added quantity of salt is 40 x 4 = 160 kg.
Before connecting Asin Salt to the mains you must carefully let the salt dissolve. Approx. 24 hours after complete
dissolution switch Asin Salt on and read its output from the stabilized bar of the LED indicators. Depending on the
pool size and output find the ideal running period in the table. You can increase the output of the electrolyzer by
adding more salt. 1 kg of salt per m3 of water will increase the output by approx. 10%. The maximum quantity of
salt that you can use is approx. 7 kg per m3. Exceeding this limit concentration would cause overloading of the
feeding part of ASIN Salt. To avoid this, ASIN Salt is equipped with automatic monitoring of the maximum current.
In case of overloading it gets disconnected automatically. Before switching the system on again you must dilute the
pool water.
Never use salt concentrations lower than 2 g per litre - it significantly reduces the operating life of the electrodes.
Higher concentrations than 7 g / litre are very corrosive and besides overloading of the feeding part of ASIN Salt
they can cause corrosion of the swimming pool equipment. The table shows the recommended electrolyzer output
for the particular swimming pool volume and the running period of 8 hours a day.
The production of chlorine depends on the salt quantity in water and water temperature. The lower the water
temperature, the lower is the production of chlorine.
Output (%)
g Cl / hour
Max. pool volume
40
5,4
20
60
8,1
30
80
10,8
40
100
13,5
50
After checking the chlorine content in the swimming pool reduce or increase the running period accordingly.
