Aseko 12034, Руководство пользователя

Страница: 7 / 32

EN
7 ASIN Aqua NET
Use of new functions
Because of the continued development, a ASIN Aqua® unit may contain
functions, which are not completely described in this version of the user
manual. The use of such new or extended functions without a profound
and secure understanding by the operator may result in malfunctions and
severe problems. Potential consequence: Injury, heavy material damage.
• Make sure to get a profound and secure understanding of a function
and relevant boundary conditions, before you start to use it.
• Check for an updated version of the user manual or additional
documentation available for the relevant functions.
• Make use of the integrated help function of the ASIN Aqua® to get
detailed information on functions and their parameter settings.
• In case it should not be possible to get a profound and secure understanding
of a function based on the available documentation, do not use this function.
Overdosing if pH value is wrong
If disinfection is enabled before the pH value is stable in the ideal
range of 7.0 to 7.4, then it may lead to heavy overdosing of chlorine or
bromine. Potential consequence: Injury, heavy material damage.
• Do not start disinfection with chlorine or bromine until the pH
value is stable in the ideal range between 7.0 and 7.4.
Conditions before using
Make sure you have a newest and updated version of the user manual
and other documentation for all functions of the unit. Use and read the
integrated help features. In case of not understanding the information
about certain features of the unit, do not use these features.
Handling chemicals for pool water treatment.
The chemicals used with the ASIN Aqua must be handled in a safe manner
to prevent damage or personal harm. Aseko recommends you always
use personal protective safety equipment when handling the pH and
chlorine agents.
Refer to the Materials Safety Data Sheet (MSDS).
WARNING: Never mix the pH agent with the chlorine agent. When
carrying out maintenance on the clear plastic tubes or valves always rinse
with clean water to prevent mixing of the pH and chlorine agents.