Aseko 12034, Руководство пользователя

Страница: 17 / 32

EN
17 ASIN Aqua NET
6.
Select START in the blue box on the
right of the screen. This starts the pH
pump on the right of your ASIN Aqua.
7.
While the pump is running check all
the connections of your clear plastic
tubes to the pH pump. Check the
valves are not blocked or leaking and
that there
are no air bubbles.
WARNING:
Make sure fl uid moves
through the clear plastic tubes through
the pumps to the pool water.
8.
Select STOP.
Checking the installation and
pumps ensures your ASIN Aqua
is integrated into your pool system.
Once everything is set up with no problems,
calibrate and set parameters for your ASIN Aqua.
Manual Dosing
Use Manual Dosing to raise the concentration of chlorine or pH agent
within your pool. This is required if the concentration is signifi cantly
below recommended levels. You can also use Manual dosing to test the
connections of the clear plastic tubes to the pH and chlorine pumps.
1. In menu select SETTINGS then MANUAL DOSE pH or disinfection.
2.
In menu of manual dosing your selection is highlighted
with a black triangle at the bottom.
Set the parameters of your
swimming pool
Every swimming pool is unique. Temperature, size, location and water
hardness infl uence how ASIN Aqua controls your pool water and fi ne-
tunes it. In order to ensure optimal performance, you have to set the
properties and values of your swimming pool in ASIN Aqua.
1. Pool volume
2. Pool type
Select your type of swimming pool
by clicking on the
appropriate check boxes.
3. Water hardens
Set the hardness of the pool water.
This is measured in dH, 0-9 is soft,
9-21 is hard and 21+ is very hard.