ASEA AC15QTP Скачать руководство пользователя

Страница: 30 / 62

AC15QTP And AC20QTP Operations Manual....

6.2

MULTI-CABINET OPERATION

Multi-cabinet systems are operated from the Master’s control panel. Each cabinet retains its own

control panel and metering display for individual monitoring.

Apply shore power to both cabinets and turn the disconnect switch

(14)

on each cabinet to the on

position. Within 1-3 seconds each cabinet will start, fans will be heard, and the display will

become active. Using the SHORE POWER

(2)

button on each cabinet, verify the applied shore

power measures the expected form. Use the Figure 7, Front Panel Controls, on page 26 for

button references.

Press the SHORE POWER ON

(7)

button on the Master cabinet, bringing the Master and Slave

cabinets to the standby state. The green shore power LED

(7A)

on the Master and Slave cabinets

should now be lit. Measure the voltage being produced by the system by pressing the

CONVERTER POWER

(4)

buttons on the Master and Slave cabinets: they should indicate the

desired form and be within 5% of each other.

When ready to place the converter onto the ship’s distribution system, press the CONVERTER

POWER ON

(8)

button on the Master cabinet. This will close the output contactors of both the

Master and Slave cabinets simultaneously. The green LED

(8A)

should light on the Master and

Slave cabinets. With the ship’s loads now supplied by the converter, measure the load power

being supplied by each cabinet to ensure compliance to the system ratings. The system status

display will indicate a summary load percentage, based upon a worst case measurement of all

parameters.

If the system is equipped with the Seamless Transfer option, press the SHIP’S POWER -

CONVERTER

(9)

button on the Master cabinet to transfer power from the generator to the

converter. The system will operate as per the description in Section 6.1.2.

Содержание AC15QTP































































Результаты поиска

Содержание AC15QTP

Отзывы:

Похожие инструкции для AC15QTP

Бренды по названию

Популярные бренды

ASEA AC15QTP, Руководство по эксплуатации

Результаты поиска

Содержание AC15QTP

Отзывы:

Похожие инструкции для AC15QTP

Бренды по названию

Популярные бренды