X-3D-BL User’s Manual
2.2.3 Upper side of the core
Plug one of the two magnesium plates into the slots
inside the lateral magnesium parts on the upper side
of the core. In this case, orientation does not matter.
Press one of the small CF plates from above over the
lateral parts, until the CF plate touches the magnesi-
um plate completely. Slide a plastic screw through the
central hole and fix it using a plastic nut.
2.2.4 Adding the booms
Plug the booms onto the lateral parts of the Core from
below and slide them up. If a lot of force is required
to do so, it is very likely that upper and lower side
of the booms have been confused. Marking: The drill
holes to attach the motor controllers are on the lower
side of the booms.
After that, the booms have to be secured with two pla-
stic screws each. The screws go into the outer two ho-
www.x3d-shop.de
- 11 -
www.asctec.de
Содержание X-3D-BL
Страница 1: ...X 3D BL User s Manual V2 1 incl X 3D Mag...
