Ascension 5442P, Руководство по эксплуатации

Страница: 22 / 28

Operating Manual SECTION 4
PROTEGE 5442P
16 112509 Rev G
Operating the Lift Without Power
The hydraulic hand pump can be used to move the platform manually when facility
power is unavailable. It may be operated from either the inner or the outer access panel
of the right-hand machinery cabinet.
Instructions for use:
1. Locate the 12-inch [305 mm] hand pump handle stored just inside the outer access
panel on the right-hand machinery cabinet and remove it from its bracket.
2. Swivel the pump linkage outward and then insert the hand pump handle into it.
Figure 8
3. To move the platform upward, pump the handle. Please note that the hydraulic
power unit is attached with flexible mounts to minimize noise and vibration, and
that it is normal for the unit to move around significantly when pumped by hand.
WARNING!
Only use the handle provided with the pump. If this handle does not
provide enough leverage to move the platform, immediately stop pumping
and contact a repair technician.