Ascension 5442P, Руководство по эксплуатации

Страница: 12 / 28

Operating Manual SECTION 1
PROTEGE 5442P
6 112509 Rev G
Important Safety Information
When using the lift, the following basic safety precautions and practices must be
observed:
1. Read and understand all of the information contained in this manual.
2. Do not expose any part of the lift to a direct liquid stream or spray, such as a water
hose. This could create an electrical shock or fire hazard.
3. Do not operate the lift in the presence of combustible or explosive gas or fumes.
The electrical components of the lift could cause ignition of these chemicals.
4. Do not operate the lift if the electrical cord has become frayed or if its outer
insulation has been removed, as this could create an electrical shock or fire hazard.
5. Do not allow any equipment, including the lift itself, to lie across or on the electrical
cord, as this could cause the cord to become damaged, resulting in electrical shock
or fire hazard.
6. Set up the lift for operation only in accordance with the instructions in Section 2 of
this manual. If the lift cannot be set up as described, contact the manufacturer to
determine the correct set up for a particular application.
7. The upper height limit sensor adjustment must be confirmed every time the lift is
relocated. Failure to do so could result in serious injury to the user.
8. Operate the lift only as described in Section 3 of this manual.
9. Use extreme caution when moving the lift on an incline, as the lift weighs
approximately 850 pounds [385 kg].
10. Transport the lift as described in Section 4 of this manual.
11. Use the lift for movement of people only.
12. Use an extension cord only as described in Section 4 of this manual.
13. Always close and lock all access panels and remove all keys before leaving the lift
unattended.
14. Never leave the lift unattended while setting the lift up for operation or installing the
casters for transport.