Ascension 5442P, Руководство по эксплуатации

Страница: 18 / 28

Operating Manual SECTION 2
PROTEGE 5442P
12 112509 Rev G
Figure 5
12. Lower the platform several inches and then raise it again until it stops automatically.
Repeat Step 9 to verify that the height is correct. Re-position the optical reflector if
necessary until the platform stops at the correct height.
13. Return the height adjustment tool to the tool holder in the left-hand machinery
cabinet.
14. The lift is ready for use.
WARNING!
The lift’s stop height MUST be verified every time the lift is relocated, and reset
if necessary. Failure to do so could result in serious injury to the user.
WARNING!
Always close and lock all access panels and remove all keys before leaving
the lift unattended.