Page 4-6
Troubleshooting
11
Click the highlighted slot number where the adapter is installed.
12
Click the
TEST
button to start the test sequence.
If the Bandwidth Utilization Test is selected, press any key to stop
packet collection.
When the tests finish, the test results are displayed in the Trou-
bleshooter window.
13
Verify the results to make sure that all tests passed.
▲
If a test fails, check that the adapter is seated properly in
a PCI slot or try installing the adapter in a different PCI
slot and run the tests again.
14
Click
QUIT
in the Troubleshooter window or select
Quit
from
the menu bar.
15
Open the Apple Menu and select
Control Panels
.
16
Select
AppleTalk
from the Control Panels submenu.
The AppleTalk control panel appears.
17
Open the Connect Via: drop-down menu and select the Ethernet
slot number where the adapter is installed.
18
Close the AppleTalk control panel.
19
Click
Save
to save changes.
Asanté Driver Local Statistics (ADLS) Program
To run the Asanté Driver Local Statistics (ADLS) program on your Power
Macintosh to display the configuration information on the adapter, follow
the procedure below.
1
Insert the Asanté Driver Disk into the floppy drive and double-
click the diskette icon to open it.
2
Double-click the
Power Macintosh
folder icon.
3
Double-click the
Utility Folder
icon.
4
Copy the
Asanté ADLS for PCI
to your hard drive.
