Page 4-5
Using the Diagnostic Program
Select
to choose one Adapter if you have multiple adapters in your PC.
Help
explaining the purposes of the program.
About
explaining about the Adapter itself.
Exit
to exit the program.
Power Macintosh Diagnostic Program
To run the diagnostic program on your Power Macintosh:
1
Open the Apple Menu and select
Control Panels
.
1
Select
AppleTalk
from the Control Panels submenu.
The AppleTalk control panel appears.
2
Select
Printer port
from the Connect Via: drop-down menu.
3
Close the AppleTalk control panel, then click
Save
to save
changes.
4
Insert the Asanté Driver Disk into the floppy drive and double-
click the diskette icon to open it.
5
Double-click the
Power Macintosh
folder icon.
6
Double-click the
Utility Folder
icon.
7
Copy the
Asanté Troubleshooter for PCI
to your hard drive
.
8
Double-click the
Asanté Troubleshooter for PCI
icon to start
the program.
9
Click
OK
in the Troubleshooter start-up screen.
The Troubleshooter loads and displays the main window with the
following tests:
❏
Loopback Test
— verifies the operation of the network
interface circuitry and the adapter by transmitting and
receiving special packets.
❏
Ping-Pong Test
— verifies communication with
another Macintosh on the network.
❏
Bandwidth Utilization Test
— calculates the total
bandwidth utilization of the network.
10
Click the checkboxes to select the Loopback Test, the Ping-Pong
Test, and the Bandwidth Utilization Test.
