3.
Clearing the Memory
After the data has been successfully transferred and saved, the tool memory should be
cleared to allow for more welds to be stored.
a.
Press <+> and <enter> key simultaneously and the tool screen will display 0000
b.
Enter in 0030
c.
The screen will now display the amount of available storage left on the unit.
Enter in 0001 and press <enter>
d.
The memory is now deleted. To double check, enter in command 0030 again and
the amount of available storage should be 1101 or 1100, indicating the memory is
completely
empty.
Asahi/America, Inc.
UF 2000/1
Page 17 of 1
8
