Version: B
- 11 -
CAUTION: MUST activate alarm first, or else there is
no function for this unit.
·
Turn the alarm body counterclockwise and take off the
bracket.
·
Press the bracket on the installation position, mark
installation hole of the bracket with pencil.
·
Bore two installation holes on the sign with electric drill.
Make diameter of holes is 5mm, Strike the two plastic
plugs into holes with hammer.
·
Remove fixing plug from the bracket with screwdriver if
necessary (Refer to Diagram 4).
·
Attach the bracket to the plastic plugs and fix tightly the
screws into the plastic plugs. (Refer to Diagram 5).
·
Fit the alarm on the bracket and turn the alarm body
clockwise, until matching well on the bracket.
·
Insert fixing plug to the gap between bracket and bottom
cover for fixing alarm if you want(Refer to Diagram 6).
·
Press the button for test the unit. The alarm sounds 3
beeps – 1.5 seconds pause, repeat it until release the
button, if no sound, it indicates a defective alarm, you
can refer to ”Trouble shooting” for solution or return to
your retailer during warranty.
·
If you have any questions on installation, you can
contact your retailer.
WARNING:
To prevent injury, this unit must be securely attached to the
wall or ceiling in accordance with the installation instructions.
Diagram 4
Diagram 5
Diagram 6
Produced for:
as – Schwabe GmbH
Hummelbergstr. 6
72184 Eutingen, Germany
www.as-schwabe.de
