Aruba 9240, Руководство по установке

Страница: 9 / 29

Aruba 9240 Gateway
| Installation Guide 9240 Gateway |
9
Power, Status, and Peered LEDs
In addition to the LEDs on each individual port, there are three additional LEDs on the front panel
that provide overall status of the device. These LEDs provide basic monitoring of the overall status of
the 9240 gateway.
LCD Panel
The Aruba 9240 gateway is equipped with an LCD panel that displays information about the
gateway’s status and provides a menu that allows basic operations such as initial setup and reboot.
The LCD panel displays two lines of text with a maximum of 16 characters on each line. When using
the LCD panel, the active line is indicated by an arrow next to the first letter.
The LCD panel is operated using the two navigation buttons to the right of the screen.

Menu : Allows you to navigate through the menus of the LCD panel.

Enter : Confirms and executes the action currently displayed on the LCD panel.
LCD Mode Menu
The LCD mode menu includes four modes as shown in the following table.
Table 5
Power, Status, and Peered LEDs
LED Function Indicator Status
Power System power Green (Solid) Power On
Off Power Off
Status System status Green (Solid) Operational
Green (Blinking) Device is loading software
Amber (Blinking) Major alarm
Amber (Solid) Critical alarm
Off No power
Peered Reserved for future use N/A N/A
Table 6
LCD Panel Mode
LCD Mode Function Displays Description
Boot Displays the boot
status of the gateway.
“Booting ArubaOS... Boot status of the gateway
LED Displays the mode of
the STATUS LED of
ports. The LED mode
menu allows to
choose what
information is
communicated by the
STATUS LEDs on each
port.
LED mode: ADM Administrative– Displays whether the port is
administratively enabled or disabled
LED mode: SPD Speed– Displays the speed of the port
LED mode: DPX DPX-Displays the duplex mode of the port
Exit Exit LED menu