Aruba 9240, Руководство по установке

Страница: 12 / 29

12
| 9240 Gateway
Aruba 9240 Gateway
| Installation Guide
Serial Console Port Adapter
A modular adapter can be used to convert the RJ-45 (female) connector to a DB9 (male) connector.
Refer to Figure 4 for complete details.
Figure 4 RJ-45 (female) to DB9 (male) Modular Adapter Conversion
Management Port
The 9240 gateway is equipped with a 10/100/1000BASE-T Gigabit Management (RJ-45) port.
The management port provides 10/100/1000 Mbps Ethernet access to the 9240 gateway CLI, SNMP,
and Web interface for complete system management and troubleshooting. It can also be used to
connect to a separate management network.
The management port has an LINK/ACT LED on its left side and SPEED LED on its right side. During
operation, these LEDs provide status information as shown in the following table:
USB Interface
The 9240 is equipped with two USB 3.0 interface. A USB storage device can be used to save and
upload configurations to the gateway. USB functions are controlled through the LCD panel on the
front of the gateway. For more information on the LCD panel and its functions, see “LCD Panel” on
page 9 .
Expansion Slot
The expansion slot is reserved for future use.
Grounding Point
To meet safety and electromagnetic interference (EMI) requirements and to ensure proper
operation, the gateway must be adequately grounded before power is connected. Connect a
grounding cable to earth ground and then attach it to the chassis grounding point using two screws.
Comply with electrical grounding standards during all phases of installation and operation of the
product. Do not allow the gateway’s chassis, network ports, power supply, or mounting brackets to
Table 8
10/100/1000BASE-T (RJ-45) Management Port
LED Function Indicator Status
LINK/ACT Link Status Information Green (Solid) Link has been established
Green (Blinking) Link activity
Off No link on port
SPEED Interface Speed Green (Solid) 1000 Mbps
Off 10/100 Mbps
3
4
5
2
5
6 3
RJ-45 DB-9
Internal
Connections
TxD
GND
RxD
1
2
3
4
5
6
7
8
TxD
GND
RxD
RJ-45 Female
Pin-Out
DB-9 Male
Pin-Out
TxD
RxD
Ground
5
4
3
2
1
9
8
7
6