6
AP-200-MNT-W2 Mounting Kit
| Installation Guide
Figure 8
Routing Cables through Mount Housing
2. Insert the mounting bracket into the mount housing using the following steps:
a. Plug the Ethernet cables (and power cord if applicable) into their corresponding ports on the back of
the AP.
Figure 9
Inserting the Mounting Bracket with Cables Routed
b. Align the mounting bracket so that the button is oriented to the right and route the ends of the cables
through the corresponding openings on the bracket as shown in
Figure 9
.
c. Press the mounting bracket into the housing and secure the bracket to the mount housing using the
pan head screws provided.
d. (Optional) If you are using the cable adapters, route cable ends through the upper openings of the
bracket.
3. Attach the AP to the mounting bracket using the following steps:
a. Plug the Ethernet cables (and power cord if applicable) into their corresponding ports on the back of
the AP.
If your AP is supported by a DC power source, route power cable through the bottom-left opening of the housing.
Screw holes
Screw holes