24
25
Electronic programmer
A- Display field
B- Functions
Automatic operation indication
Cooking indication
Running indication
Timer
C - Buttons
Timer
Cooking time
End of cooking time
of the set cooking programme
Manual position and cancellation
on the digital display
To decrease the numbers
on the digital display
To increase the numbers
(Only for CAO888X)
Before any setting, press button 4
to
start
the
oven.
Caution
!
Setting the time
After connection to the mains or
1.
reconnection after a power cut
,
the
display
shows flash”0:00”
and
Press button 4
, the signal
2.
function is on.
The signal function been flashing, set
3.
the current time using buttons 5 and 6.
5 seconds after the time has been set, the
new data will be saved. The signal
function is on.
Timer
The timer can be activated at any time and
any function. The timer can be set for from
1 minute to up to 23 hours and 59 minutes.
To set the timer you should:
1. Press button 1, the display will show
“
0.00
”
and flashing .
2. Set the timer using buttons 5
and
6
.
3. 5 seconds after the time is set, the signal
function is on. The new data will be
save and the display will show the
current time.
Press button 1, the remanent time will be
4.
shown on the the display. ( In the last
minute, the display will show the
seconds)
If you want to reset the timer, repeat
step 2 and set time to 0:00.
When the set time is up the alarm signal
will be activated and the signal
function starts flashing again.
