Arturia Spark 2, Руководство пользователя

Страница: 97 / 104

ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
97
7 THE SPARK CONTROLLERS
7.1
USING THE CONTROLLER WITH THE SPARK ENGINE
7.1.1 Set Move Knob Mode
Right-click the Move knob and turn it to switch from “Shift by one step” mode to “Shift
by one loop size” mode.
7.1.2 Set Sequencer Follow Mode On / Off (Spark Creative)
When you have a pattern containing 32 steps the Sequencer Step pads have the option
to follow the position of the pattern when it crosses over from steps 1-16 to steps 17-32.
This is called “Sequencer Follow mode”. To toggle this feature on or off, simply press the
<< and >> buttons at the same time.
7.1.3 Roller Fx
When using the Roller effect in the Spark software the Roll effect can be applied only to
one instrument at a time, for the obvious reason that you are using your mouse to play
the instrument.
When using the hardware controller, you are free to apply the Roll effect to any number
of instruments simultaneously. You can also start a roll on one instrument and press
another instrument pad while maintaining your initial roll. Enjoy!
The Roll velocity is triggered on the software version by clicking on a pad, holding it, and
moving the cursor up and down on the pad. However, the instrument pads on the
hardware controller are pressure-sensitive, so you can change the velocity output of the
Roll effect in real time.