Arturia Spark 2, Руководство пользователя

Страница: 39 / 104

ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
39
5.3.6 The Filter / Slicer / Roller Buttons
5.3.6.1 The Filter Button
The Filter button offers a Low pass, a Band pass and a High pass filter, Oberheim Low,
High, Band and Multi-mode filters
with cutoff and resonance.
To select your filter click on the FILTER button repeatedly. Your choice will be displayed
on the center display window. Alternatively you can use the direct access keeping the
Filter button pressed to show the current filter, and moving your cursor or finger on the
sub-effect you want to select.
The Cutoff and resonance can be modulated with the mouse on the software version or
your finger on the FX Live pad.
The resonance is modulated vertically from the bottom of the pad to the top of the pad.
Cutoff is modulated horizontally, from the right side of the pad to the left side of the
pad.
Play a pattern of your choice and click or touch anywhere on the right edge of the FX
pad while maintaining your click or touch; draw a straight horizontal line towards the left
side of the FX pad. You will hear the cutoff modulating. The amount of modulation
applied can be seen on the center display panel.
Now place the cursor close to the bottom right corner of the FX pad and trace a line
straight up to the top edge of the pad. You are modulating the resonance.
Of course, both Cutoff and Resonance can be modulated simultaneously by moving your
finger or the mouse in any direction and at any speed you wish.
5.3.6.2 The Slicer button
The Slicer will repeat the value of the note selected while applying an effect. You can
choose between the following effects:
Repeat mix
Click to choose the value of the note to be repeated with the Repeat mix effect. The
effect will be applied for the amount of time your mouse click is maintained. Release
your click to cancel and resume normal playing.