Arturia ARP 2600V, Руководство пользователя

Страница: 87 / 101

ARTURIA – ARP 2600 V – USER MANUAL 87
Still on this mixer, lower the VCO2 volume. You will notice the change of tone
resulting from the change of waveform on VCO1. If you need to be convinced,
disconnect the cable (click on the mixer audio input to disconnect the cable).
You thus move from a saw-tooth to a square signal. Reconnect the saw-tooth
to continue with this preset.
Do the same with oscillator2: direct the saw-tooth waveform to the VCO2 input
on the VCF mixer.
Still on the same mixer, raise the volume of oscillator3 to complete the base
tone. You will hear a sound composed of three oscillators.
Raise the volume of oscillator3
Let’s apply a variation to the filter cut-off frequency with the LFO. For this,
connect the sinus waveform of the “LFO” module (on the left of the “ARP
sequencer”) to the “control VCO2 sin” modulation input on the VCF. Raise the
volume potentiometer for this modulation. The filter cut-off frequency will vary
in a cyclic manner.