ARTURIA – ARP 2600 V – USER MANUAL
40
The quantizer section
3.1.2
The LFO
On the original ARP 2600, oscillator2 could be set to low frequency position
(“LF” position in the range) for use in LFO mode. Although practical, this solution
prevented us from using 3 oscillators simultaneously and a slow modulation on
the filter cut-off frequency for example.
Thanks to the LFO module situated on the “Keyboard control” module of the
“All” mode, you can keep the third oscillator as base sound and obtain an
additional source of modulation for one of the 13 available destinations. It is
also possible to synchronize the clock speed of the LFO to that of the MIDI
sequencer by clicking on the “MIDI sync” interrupter.
Apply two additional types of modulation to the preset “1_Osc”:
For example: the LFO is “pre-cabled” to obtain a vibrato (simultaneous
frequency modulation) of the two oscillators. Simply raise the linear
potentiometer “Vibrato Depth”, situated on the LFO module, to create this
effect.
Содержание ARP 2600V
Страница 1: ...ARTURIA ARP 2600 V USER MANUAL 1 USER MANUAL...
Страница 81: ...ARTURIA ARP 2600 V USER MANUAL 81...