Arturia ARP 2600V, Руководство пользователя

Страница: 82 / 101

ARTURIA – ARP 2600 V – USER MANUAL 82
6 A FEW ELEMENTS OF SOUND DESIGN
Here is a series of five examples designed to guide you through the creation of
a sound and a sequence. They are classed in order of difficulty and organized
into two parts:
The first part will give you an introduction to sound synthesis. For this you will
start with the most simple patch (make a VCO oscillator “ring” in a VCA amp
going through the filter) and finish by programming of a richer sound (several
sources of VCO, VCF filter, VCA, envelopes…)
The second will take you through every aspect of the sequencer
6.1 Simple patch without cabling
To begin, we will look at programming an elementary monophonic sound. It
will be composed of four modules:
• two oscillators (VCO1 and 2)
• a low-pass filter (VCF)
• an amplifier (VCA)
• the ADSR envelope connected to the filter
You will thus obtain a basic patch for subtractive synthesis.
Figure 1 shows the different potentiometer positions:
To begin, choose the preset “Temp/ Blank” in the “Template” / “Temp_Synth”
bank. You will notice that no sound is heard when you play a note. Don’t worry,