Art's-Way Manufacturing CATTLEMAXX 6105, Руководство оператора

Страница: 61 / 97

INTRODUCTION 59
position of the discharge and the type of material
processed.
Three viewing windows (Figure 109, Detail G) are
located at the front right corner of the mixing tank
and one window in rear of mixing tank to observe
the feed level during grinding and mixing.
A ladder is located at the front left corner of the
mixing tank along with a grab handle on top of tank
to gain access to the spring-loaded mixing tank lid.
CAUTION: DO NOT OPEN SPRING-
LOADED MIXING TANK LID WHILE PTO
IS
ENGAGED AND TRACTOR IS
RUNNING.
Many convenient features are standard equipment
on the Art’s Way CattleMaxx including:
1. Heavy Duty 540 RPM implement driveline with
shear clutch.
2. 20 inch heavy duty rollermill.
3. Roll scrapers
4. Rollermill hopper magnet system.
5. Feed inspection tube under rollermill.
6. Ingredient supplement hopper.
7. Tongue jack and safety chain.
8. Ladder and fenders.
9. Four large inspection windows in tank.
10. Spring loaded tank lid.
11. Hydraulic or mechanical positioning of
discharge auger. This includes a hydraulic
cylinder or mechanical crank for lift and
hydraulic motor or mechanical crank for swing.
12. 8 inch diameter by 10 foot long unloading
auger.
13. Discharge auger hood with spring loaded relief
baffle.
14. 10.00 x 15 tires.
15.
29” vertical discharge.
Below is a list of optional attachments available:
1. Hydraulic auger feeder.
2. Electronic scale, with digital readout.
Microprocessor model is also available.
3. Horn, light, or horn and light for electronic scale.
4. Unloading auger extensions; 3 ft. or 6 ft. folding
or bolt-ons.
5. Highway transport light kit.
6. Mechanical or hydraulic lift and swing.
7. Roll speed differential drive rollermill.
8. Hydraulic Discharge (Tractor Operated)
designated with an H behind model number
(i.e. 6105H).