background image

30

DRAWSTITCH LIMITED

End-User License Agreement

 

IMPORTANT - READ CAREFULLY: THIS END USER LICENSE 

AGREEMENT (“the Agreement”) IS A LEGAL AGREEMENT BETWEEN 
YOU (EITHER ON BEHALF OF YOURSELF AS AN INDIVIDUAL OR ON 
BEHALF OF AN ENTITY AS ITS AUTHORIZED REPRESENTATIVE) 
AND DRAWSTITCH LTD (“DRAWSTITCH”) FOR Creative DRAWings® 
Artistic edition SOFTWARE (“the Software”), consisting of the Creative 
DRAWings® Advanced (Suite and/or Premium) edition version 7 and the 
Creative DRAWings® Simple Cut edition version 7.
 

PLEASE READ THIS AGREEMENT CAREFULLY AND PRINT OUT 

A COPY FOR YOUR RECORDS. THIS AGREEMENT SUPERSEDES 

PREVIOUS VERSIONS.

 
BY CHECKING “I AGREE” IN THE CHECKBOX BELOW AND CLICKING 
“NEXT”, INSTALLING THE SOFTWARE, COPYING OR OTHERWISE 
USING THE SOFTWARE, YOU AGREE TO BE BOUND BY ALL OF 
THE TERMS OF THIS AGREEMENT REGARDING YOUR USE OF 
THE SOFTWARE. IF YOU DO NOT AGREE TO THE TERMS OF THIS 
AGREEMENT, CLICK ON THE “I DO NOT AGREE” BUTTON AND/OR 
DO NOT INSTALL, COPY OR OTHERWISE USE THE SOFTWARE.
 

Entire Agreement – Headings

This Agreement constitutes the entire agreement between the parties 
concerning the subject matter hereof and cancels and supersedes 
any prior understandings, statements, representations, warranties, 
discussions, negotiations, commitments and agreements both oral and 
written between the parties hereto with respect thereto, whether oral or 
in writing. The division of this Agreement into sections and the insertion 
of headings and titles are for convenience of reference only and shall not 
affect the construction or interpretation of this Agreement.
 

The Software

The term “Software” shall also include Demonstration/Trial Version(s) of 
the Software (“the Demo Software”) and any upgrades, supplements, 
modules, add-on components, modified versions or updates of the 
Software, as well as any images, photographs, templates, animations, 
videos, and text incorporated into the Software and associated media, 
printed materials and “on-line” or electronic documentation, licensed to 
you by DRAWSTITCH and/or its licensors any time, even after the date 
you obtain your initial copy of the Software, unless we provide other terms 
along with the upgrade, supplement, add-on component, or update. Any 
downloading, installation or use of the Software is subject to compliance 
with the terms and conditions of this Agreement and all applicable laws 
and regulations, including laws and regulations governing copyrights, 
patents, trade secrets and trademarks.
IN DEMONSTRATION/TRIAL VERSIONS, SOME OF THE TOOLS/
FUNCTIONS OF THE SOFTWARE MAY BE DISABLED. THE EXACT 
TOOLS/FUNCTIONS AVAILABLE IN THE SOFTWARE MAY BE SUBJECT 
TO THE LEVEL/MODULE/ADD-ON PURCHASED BY THE USER.
IF THE SOFTWARE IS PART OF A SOFTWARE-PACKAGE, THE 
TOOLS/FUNCTIONS DESCRIBED ON THE SOFTWARE-PACKAGE 
BOX OR ACCOMPANYING LITERATURE MAY REFER TO OTHER 
COMPONENTS OF THE SOFTWARE-PACKAGE OR THE COMBINED 
USE OF THE SOFTWARE WITH OTHER COMPONENTS OF THE 
SOFTWARE-PACKAGE.
The Software is protected by copyright laws and international copyright 
treaties, as well as other intellectual property laws and treaties. The 
Software is licensed, not sold.
 

License Grant

DRAWSTITCH grants you a license to Use one copy of the Software. 
“Use” means storing, loading, installing, and executing or displaying the 
Software. You may NOT modify the Software or disable any licensing or 
control features of the Software. If the Software is licensed for “concurrent 
use”, you may NOT allow more than the maximum number of authorized 
users to use the Software concurrently.
 
You are a Licensed User of the Software only when you have fully paid for 
acquiring from an authorized supplier of DRAWSTITCH a licensed copy 
of the Software and a Hardware Key (USB Key/Security Key or dongle) 

and/or Product Key and/or Activation Code and /or Upgrade Code and/
or Update Code (as applicable) that renders the Software operational, for 
each separate computer that it will be installed or used on. You can then 
use the Software as long as you need, with no time limitations. You may 
not duplicate the Software in whole or in part, except that you can make 
one copy of the Software for backup or archival purposes.
 

You understand and agree that from the purchase of the Software 

you bear the risk of loss of the Hardware Key and/or Product Key, 

Product Key Card, Activation and/or Upgrade and/or Update Code 

and/or Activation/Upgrade/Update Code Card (as applicable) which 

accompanies/-y your copies/-y of the Software, whereas, for that 

matter, the Hardware Key/Product Key/Activation Code/Upgrade 

Code/Update Code correspond(s) to the value of the Software and 

should be insured accordingly.

You are entitled to replacement of a lost Hardware Key only if it 

was “time-locked” (wherever applicable). In such case, you will be 

charged only for the value of the Hardware Key as well as for the 

applicable delivery expenses.

 

Ownership

The Software is owned and copyrighted by DRAWSTITCH. Your license 
confers no title or ownership in the Software and is not a sale or grant of 
any rights in the Software. The Software is licensed, not sold. Third party 
suppliers and/or licensors of DRAWSTITCH may protect their rights in the 
event of any violation of the Terms of this End-User License Agreement.
 

Separation of components

The Software is licensed as a single product. Its component parts may 
NOT be separated for use on more than one computer. If the Software is a 
component of a software-package, which you have purchased as a whole 
product, you may use the Software as part of this software-package, but 
not separate the Software from it.
 

Copies and Adaptations

You may only make one copy of the Software for archival or backup 
purposes or when copying or adaptation is an essential step in the 
authorized Use of the Software. All such copies shall remain the sole 
property of Licensor, and shall be subject to the terms of this Agreement.  
A complete list of such copies and their exact locations shall be provided 
to Licensor by Licensee upon request. You must reproduce all copyright 
notices in the original Software on all copies or adaptations. You may not 
copy the Software onto any bulletin board or similar system.
 

Restrictions

You may NOT modify, translate, rent, lease, loan, distribute, resell for 
profit, assign, or create derivative works based upon the Software or any 
part thereof. You may NOT disassemble, decompile, reverse-engineer, 
decrypt, recreate or generate the Software or any part thereof. You agree 
not to reconfigure or modify the Software in order to enable features or 
functionality without notifying DRAWSTITCH or its Licensors and paying 
the applicable Software license fee. You may not remove any proprietary 
notices or labels on the Software. Any use in violation of this Section shall 
immediately terminate your license to the Software.
 

Consent to Use of Data

You agree that DRAWSTITCH and its licensors may collect and use 
technical information gathered in any manner as part of the product 
support services provided to you, if any, related to the Software. 
DRAWSTITCH may use this information solely to improve its products or 
to provide customized services or technologies to you.  DRAWSTITCH 
may disclose this information to others, but not in a form that personally 
identifies you.  
 

   

While installing the Software, you are being asked to register it by giving 
DRAWSTITCH or its licensors some personal information (name, address, 
zip code, country, e-mail address and occupation). (For more information, 
please read our Privacy Policy). Registering the Software is not obligatory 
though it is prerequisite in case you want to upgrade your version of the 
Software with the latest one, at a special upgrade-price.

Содержание Edge 12

































Отзывы: