Artistic studio Artristic Studio Easel, Руководство пользователя

Страница: 8 / 15

14 15
How To Attach A Canvas To Your Artristic Easel How To Remove A Canvas In 10 Seconds
14
16
15
17
1
3 4
2
5
� Adjust the tension of the large knob
at the back of the Hub to a finite de-
gree so that you can rotate the can-
vas and it will stay where you leave it
� Give a quick, firm tap against the outer
edge of the T-Bar and it will slide back -
ward and release its hold from the side of
the canvas frame
� Repeat this action with the right side
T-Bar arm and also the middle bottom
one. Don’t touch the top centre T-Bar
arm yet
� Stand behind your canvas then lift up
both of the left side T-Bar arm clamps to
unlock them
� After you have checked that the first
T-Bar is correctly connected, slowly
rotate the canvas until you bring the
next T-Bar arm into your line of sight
and repeat this checking process with
the three remaining T-Bars.
� Starting with the left side, check
that the canvas frame is sitting
squarely and flush up against the
back of the shelf of the T-Bar. Then
give each pointed rod no more than
three turns to ensure the points have
penetrated the wood
NOTE:This procedure is infinitely easier
to carry out than it was to describe.
� Once you have done it a few times
it will become very straightforward
and a natural part of your painting
preparation.
So worth it for the many advantages
and benefits this easel will reveal to
you as you use it
� Now hold the top of your canvas with both hands, and in
one smooth but quick upward movement, lift the canvas off
the T-Bar arm.
When removing your canvas there
is no need to touch the pointed rods
� Rotate and return your canvas to
its upright position, tilt it slightly
backward and lock in position.