Artistic studio Artristic Studio Easel, Руководство пользователя

Страница: 11 / 15

20 21
How To Make The Tripod Legs Spread
Wider Than Their Pre-set Distance
How To Make The Tripod Legs Spread
Wider Than Their Pre-set Distance
1
3
5
2
4
6
7
9
11
8
10
12
The three tripod legs are pre-set in their first position to allow the bottom of them to be spread apart
from each other to a distance of 40cm (18 inches). But they can also be adjusted to give you two more
width options. The following describes how you can do that
� To increase the Tripod leg
spread to 90cm (35 inches), first
remove the top Hub section
from the tripod and push all
three legs close together
� In its first posi -
tion, you will see
at the top of each
leg there is a Leg
Adjuster Bracket
to the left of the
large bolt head
and two ledges
just above that
� To return the legs to their
pre-set 18 inches (40cm)
spread, just fold all three legs
together again
� To adjust the
legs to open to
the 3rd and wid -
est distance apart,
ensure again that
all legs are folded
down as in im-
age 7 and pull the
bracket out again
� This time keep
raising the leg
out and upwards
until you see the
bracket over the
top of the third
ledge
� Depending on the sizes of canvas you at -
tach to the easel, this leg widening feature
allows you to experiment with a variety of
heights and positions, and to paint while
sitting with many different types of chairs
and stools
� Push the brack -
et down onto this
ledge.
Fold the three legs
flat together as in
image 7, then pull
them open again to
achieve the widest
spread of the legs
� Now this time
push or tap the
bracket back IN
on all three legs.
Next time you
spread the legs
outward they will
revert to their 1st
position
� Pull this brack -
et out as far as it
will go (it won’t
fall off)
� Push or tap
sharply on the
bracket and
push it back
down onto the
first ledge
� Fold the leg back down until it is again
flush up against the centre tube, then re-
peat the process with each of the other
two legs, using images 1 through 5 as a
guide
The next time you pull the legs apart they
will lock in the wider position and keep
doing so until you re-set the bracket.
*See next page for instructions on re-setting
bracket.
� Now pull the
leg out and up-
wards until you
can see that if you
pushed or tapped
the bracket down-
wards suddenly, it
would drop onto
the top of the first
lower ledge.
The Leg Adjuster Bracket
PUSH
PULL