Artistic studio Artristic Studio Easel, Руководство пользователя

Страница: 4 / 15

6 7
CAUTION
Do not rotate
tripod Head
when this knob
has been tight-
ened.
The Sizes Of Canvas You Can Attach
to Your Artristic Easel
What The Knobs On The Back
Of The Hub Are For
The Hub can be instantly rotated and adjusted in conjunction with the T-Bar arms and the tripod as
you paint, bringing any part of your canvas directly to your brush, regardless of your height, whether
sitting or standing
This screw holds
the Pan Head
Adaptor onto the
tripod Pan Head
This knob controls
the rotation of
your canvas.
This knob locks
the Hub facing
forward, positioned
in the centre
between the two
foam-covered
tripod legs.
This large knob
attaches the Hub
section to the top
of the tripod
This bolt MUST
remain firmly
locked at all times.
This knob adjusts
the backward tilt
of your artwork
from vertical
through to hori-
zontal.
The T-Bar Arms slide into the archways
and can lock into place in two positions by
pushing down on a pop-up button at the end
of the arm, thus locking it to the Hub
Position 1 The T-Bar Arms are locked onto
the Hub using the pop-up button Archway
hole closest to the centre of the Hub.
This allows you to attach canvas stretchers in
sizes from approximately 51 cm up to 109 cm
(20 inches up to 43 inches).
Position 2
The T-Bar Arms can be locked
further out along the Hub projecting arm by
popping the button up through the second
Archway.
This allows you to attach canvas stretchers in
sizes from approximately 63 cm up to 122 cm
(25 inches up to 48 inches).
Note: On page 23 of this manual you can see many other positions and ways you can attach three or
four of the T-Bar Arms to the Hub which will give you, even more choice when choosing canvas and artboard
sizes for use with your Artristic easel.
CAUTION:
DO NOT OVER TIGHTEN ANY OF THE KNOBS
Position 1
Position 2