Arthrex SynergyRF AR-9800 Скачать руководство пользователя страница 33

Страница: 33 / 56

Setup

Synergy

™

System

Service Guide

DFU-0276-4r0_fmt_en-US

Page 27 of 50

Reorient or relocate the receiving device.

Increase the separation between devices.

Connect the device to an outlet on a different circuit than the other

device(s) are connected.

Consult the manufacturer or field service technician for receiving devices
for guidance.

Power off any other RF devices not being used in the procedure.

Eliminate any points where the RF cords contact or cross cords of the
receiving device e.g., arthroscopic imaging system.

4.5

Basic Setup Procedure for the AR-9800 Console

NOTE: Section 5.0, Operation, of the User’s Manual, explains how to use the

console.

Inspect all cords for cracks, nicks and breaks. Inspect all connectors for damaged

or missing parts.

Place the AR-9800 on a flat, dry surface, such as the AR-6481 Arthrex

Arthroscopy cart.

Connect the receiver end of the power cord for the AR-9800 into the AC
socket and the plug end to the facility AC mains supply.

Power ON console.

Allow to fully initialize.

Attach a single use, disposable Arthrex Apollo

Device (Probe).

Note: For Probes with suction, attach the suction adapter to the standard
hospital suction system or pump equipment. Sterile suction tubing

required

for use with Apollo

aspirating probes. Please review the Probe

DFU (DFU-0242-XX) for the appropriate suction ranges and other operational
parameters.
6.

Attach a footswitch, if applicable.

W A R N I N G !

DO NOT

stack or place equipment adjacent to the AR-9800 console if possible. If

such a configuration is necessary, carefully observe the configuration in question

to ensure that electromagnetic interference does not degrade performance.

Do not attach handpieces or footswitches during the Self Test or the

Programming Modes.

Содержание SynergyRF AR-9800

























































Результаты поиска

Содержание SynergyRF AR-9800

Отзывы:

Похожие инструкции для SynergyRF AR-9800

Бренды по названию

Популярные бренды

Arthrex SynergyRF AR-9800, Руководство по обслуживанию

Результаты поиска

Содержание SynergyRF AR-9800

Отзывы:

Похожие инструкции для SynergyRF AR-9800

Бренды по названию

Популярные бренды