Arthrex SynergyRF AR-9800 Скачать руководство пользователя страница 17

Страница: 17 / 56

Product Drawings and References

Synergy

™

System

Service Guide

DFU-0276-4r0_fmt_en-US

Page 11 of 50

2.3.3

AR-9800 Display Messages

The console's Touch Screen Display [Table 2, item 5] provides information about

the status of the AR-9800 settings in real time. A list of informational and error
messages is shown in Table 4 below. Messages shaded in gray denote that
Arthrex technical support should be contacted for further instructions. Error

display messages reported to Arthrex technical services should include the Error
Message and Error Code for reference (See Figure 4, Error display).

Table 4

AR-9800 Display Messages

Message

Explanation

"Ablation Footswitch Stuck"

A button on the foot switch is stuck. Replace

the foot switch.

"COAG Footswitch Stuck"

A button on the foot switch is stuck. Replace

the foot switch.

"PROBE Already Used"

The RF device attached to the console has

either been previously used, or has been

disconnected and reconnected. Replace with a

new device.

"PROBE Communication Failure"

Communication with the RF device has been

lost. Check the connection and replace the

device, if necessary.

"Replace Probe"

The RF disposable device attached to the

console is malfunctioning.

"System Temperature Failure"

The console temperature is outside of normal

parameters, contact Arthrex technical support.

"Turn off and let cool down"

The console has overheated. Power off the

console for 10 minutes.

"WRAP Footswitch Stuck".

A button on the foot switch is stuck. Replace

the foot switch.

"Contact Technical Services"

Contact Arthrex technical services.

"Configuration File Corruption"

Contact Arthrex technical services.

"Critical Failure"

A terminal fault has occurred, contact Arthrex

technical services.

"LCD File Version Failure"

Touch panel failure, contact Arthrex technical

services.

"LCD Communications Failure"

Touch panel failure, contact Arthrex technical

services

"Main Calibration Required"

Contact Arthrex technical services.

"Power Supply Calibration

Required"

Power supply self-check failure, contact Arthrex

Technical Services.

"Power Supply Failure"

Power supply self-check failure, contact Arthrex

Содержание SynergyRF AR-9800

























































Результаты поиска

Содержание SynergyRF AR-9800

Отзывы:

Похожие инструкции для SynergyRF AR-9800

Бренды по названию

Популярные бренды

Arthrex SynergyRF AR-9800, Руководство по обслуживанию

Результаты поиска

Содержание SynergyRF AR-9800

Отзывы:

Похожие инструкции для SynergyRF AR-9800

Бренды по названию

Популярные бренды