Arthrex Synergy AR-9800 Скачать руководство пользователя страница 33

Страница: 33 / 60

Setup

Synergy

RF™

User’s Guide

DFU-0221-6r0_fmt_en-US

Page 31 of 58

Reorient or relocate the receiving device.

Increase the separation between devices.

Connect the device to an outlet on a different circuit than the other
device(s) are connected.

Consult the manufacturer or field service technician for receiving devices
for guidance.

Power off any other RF devices not being used in the procedure

Eliminate any points where the RF cords contact or cross cords of the
receiving device e.g., arthroscopic imaging system.

4.5

Basic Setup Procedure for the AR-9800 Console

NOTE: Section 5.0, Operation, explains how to use the console.

Inspect all cords for cracks, nicks and breaks. Inspect all connectors for damaged

or missing parts.

Place the AR-9800 on a flat, dry surface, such as the AR-6481 Arthrex
Arthroscopy cart.

Connect the receiver end of the power cord for the AR-9800 into the AC
Supply main input socket and the plug end to the facility AC mains
supply.

Power ON console.

Allow to fully initialize.

Attach a single use, disposable Arthrex Apollo

RF®

Device (Probe).

Note: For Probes with suction, attach the suction adapter to the standard
hospital suction system or pump equipment. Sterile suction tubing is

required

for use with the Apollo

RF®

aspirating probes. Please review the

Probe DFU for the appropriate suction range and other operational
parameters.
6.

Attach a footswitch, if applicable.

W A R N I N G !

DO NOT

stack or place equipment adjacent to the AR-9800 console if possible. If

such a configuration is necessary, carefully observe the configuration in question

to ensure that electromagnetic interference does not degrade performance.

Do not attach handpieces or footswitches during the Self Test or

the Programming Modes.

Содержание Synergy AR-9800





























































Результаты поиска

Содержание Synergy AR-9800

Отзывы:

Похожие инструкции для Synergy AR-9800

Бренды по названию

Популярные бренды

Arthrex Synergy AR-9800, Руководство пользователя

Результаты поиска

Содержание Synergy AR-9800

Отзывы:

Похожие инструкции для Synergy AR-9800

Бренды по названию

Популярные бренды