ARTEX 8700 Скачать руководство пользователя страница 48

Страница: 48 / 55

ARTEX/ACR Electronics, Inc.

A3-06-2824 Handheld Programmer Operations Manual

Y1-03-0272 Rev. F

Company Confidential

Page 46

Label and Report Printing

(No longer supported, for reference only)

After successfully programming and verifying

the ELT, tap the “Print” button for the

following options (Figure 26):

•

15-Digit Hex ID label

•

Country Code label

•

Combined label (ME406 series)

•

Report

Both the 15-Digit Hex ID and Country Code labels can be printed to a serial printer via the

bottom connector on the Meazura



MEZ1500.

Figure 26: Print Options

7.1

Printers

•

For compatible printers, contact

[email protected]

NOTE

: Artex does not provide or support the printers listed above.

7.2

Label Printing

(No longer supported, for reference only)

Prior to printing, be sure to select the applicable printer from the “Prefs” (preferences)

menu. See Subsection 4.3 for instructions on selecting preferences.
Connect the Handheld Programmer to the applicable printer using the specified cable

and adapter, as applicable.
Labels for the ELT can be printed one of two ways:

•

fter the ELT has been successfully programmed select the “print” option

, or

•

rom the Review screen, select the “print” option.

Once selected, the following print options will appear. Refer to Section 8 for labeling

requirements.

•

15-Digit Hex ID label

•

Country Label

•

Combined Label (ME406 series)

•

Report (Subsection 7.2)

NOTE

: Most Artex 406 MHz ELTs have 2 separate labels for the 15-digit Hex ID and

the Country name/code; whereas, the ME406 series uses a combined label.

Make sure the printer is connected, has the correct label stock, and is ready to print.

Содержание 8700
























































Результаты поиска

Содержание 8700

Отзывы:

Похожие инструкции для 8700

Бренды по названию

Популярные бренды

ARTEX 8700, Руководство пользователя

Результаты поиска

Содержание 8700

Отзывы:

Похожие инструкции для 8700

Бренды по названию

Популярные бренды