ARTEX/ACR Electronics, Inc.
A3-06-2824 Handheld Programmer Operations Manual
Y1-03-0272 Rev. F
Company Confidential
Page 30
12.
For ELT 345s or ELT 1000s only:
tap “Program”; quickly place ELT switch in
the test mode and release. (Quickly is <1 second).
13.
Tap the “Program” button to program the ELT.
14. Ensure that screen shows
“Programming Successful”.
15.
Verify ELT using “
Sarcalc
”, as described in Subsection 6.2.
4.7.9
Aviation User / Tail Number / Location (Long)
1.
Select ELT Baud rate.
2.
For the ELT 345 and ELT 1000, refer to Note 1 on page 23 before continuing.
3.
For the ELT 3000 and ELT 4000, refer to Note 2 on page 23 before continuing.
4.
Select Protocol.
5.
Select Country Code.
6.
Go to Graffiti Screen and tap on letter/numbers
7.
Enter the tail number of the aircraft, which is up to seven alphanumeric
characters.
•
Acceptable characters are letters (A-Z), numbers (0-9), a hyphen (-), a
space ( ), and a slash (/).
•
If fewer characters are entered, that will be reflected in the final hex code.
•
Spaces are filled in on the left of the data.
8.
Tap
“
Done
”
when finished.
9.
Tap “ENTER” button on
Program screen. The 32-digit hex code is shown at the
bottom of the screen, with the abbreviated 15-digit hex code below it.
10.
For ELT 345s or ELT 1000s only:
tap “Program”; quickly place ELT switch in
the test mode and release. (Quickly is <1 second).
11.
Tap the “Program” button to program the ELT
.
12.
Ensure that screen shows “Programming Successful”.
13.
Verify ELT u
sing “Sarcalc”
, as described in Subsection 6.2.
4.7.10
Std Location / Aircraft 24-Bit Address (Long)
1.
Select ELT Baud rate.
2.
For the ELT 345 and ELT 1000, refer to Note 1 on page 23 before continuing.
3.
For the ELT 3000 and ELT 4000, refer to Note 2 on page 23 before continuing.
4.
Select Protocol.
5.
Select the desired number system (Octal: 8 digits from 0-7 or Hex: 6 digits from
0-9 or A-F) to match the format of the 24-bit address provided.
6.
Enter the 24-bit address.