ARTEX/ACR Electronics, Inc.
A3-06-2824 Handheld Programmer Operations Manual
Y1-03-0272 Rev. F
Company Confidential
Page 23
Figure 14: Alphabetical and Numerical Sorting Examples
For country codes not listed, “manual entry” may be used.
NOTES
: Many countries have multiple country codes assigned by the ITU. Artex has
verified the required or preferred country code for as many countries as
possible.
The list contained in the Handheld Programmer represents our best efforts and lists
only one option for each country listed. If a conflict arises with your national authority,
please contact Artex so that we may update our information.
4.7
Protocols
The desired programming protocol must be selected. Consult with local aviation
authorities for possible programming protocol exceptions/additional rules that may apply
for particular countries.
In the protocol field, select the type of programming desired by tapping on the drop-
down menu to show the protocol options. Refer to Table 1 to determine which ELTs are
“Short Message”
ELTs
and which are “Long Message”
ELTs. Short message ELTs accept
short message protocol programming only. Long message ELTs may use either long
message or short message protocol programming. The protocols are:
•
Aviation User / Tail Number (Short)
•
Serial User / ELT / COSPAS (Short)
•
Serial User/ Aircraft 24-Bit Addr (Short)
•
Serial User/Aircraft 24-Bit/Ntl (Short)
•
Serial User/ Aircraft Operator Designator (Short)
•
Serial User/Aircraft 24-Bit Loc (Long)*ELT 345/ELT 1000/ELT 3000/ELT 4000 only*
•
Serial User/ELT/Cospas Loc (Long)*ELT 345/ELT 1000/ELT 3000/ELT 4000 only*
•
Serial User/Aircraft Operator Loc (Long)*ELT 345/ELT 1000/ELT 3000/ELT 4000
only*
•
Aviation User / Tail Number / Location (Long)
•
Std Location / Aircraft 24-Bit Address (Long)
•
Std Location / ELT Serial (Long)
•
Ntl Location/ELT Serial (Long)
NOTE 1: For the ELT 345 and ELT 1000, the baud rate must be set manually.
