manualshive.com logo in svg

Artesyn MITX-CORE-820, Инструкция по установке и эксплуатации, Страница: 79 / 133

Поделиться
Скачать
Artesyn MITX-CORE-820 Скачать руководство пользователя страница 79

BIOS

MITX-CORE-820 Installation and Use (6806800M10H

)

78

5.4

Setup Utility

The BIOS incorporates a setup utility that allows the user to alter a variety of system options. 
This section describes the operation of the utility by describing the various options available 
through a set of hierarchical menus. Not all options are available with all products and some 
depend on BIOS customizations.

The current settings are stored in the SPI FLASH NVRAM area and any changes can be copied 
back to this area using the Exit menu. The operation of the BIOS defaults is described later in 
this document.

To start the utility, press the F2 key during the early stages of POST after power-up. Note that 
this functionality operates with PS/2 keyboards, USB keyboards when enabled, and through 
the console redirection facility when enabled.

The table below briefly describes the primary menus, most of which have sub-menus. The 
following sections describe the menus in detail.

The Phoenix SCT navigation can be accomplished using a combination of the keys. These keys 
include the <FUNCTION> keys, <ENTER>, <ESC>, <ARROW> keys, and so on.

Table 5-1 BIOS Primary Menu

Menu

Options

Main

System information and date and time

Advanced

Advanced features including ACPI, CPU, HDD, USB, Network, AMT and 
South Bridge setting.

Security

Password setting

Boot

Boot priority order

Save & Exit

Saves with or without changes; Loads default settings

Table 5-2 Phoenix Navigation

Key

Description

ENTER

The Enter key allows you to select an option to edit its value or access a 
sub menu.

Left/Right

The Left and Right <Arrow> keys allows you to select a screen or menu.

Содержание MITX-CORE-820






































































































































Отзывы:

Нет отзывов