manualshive.com logo in svg

Artesyn MITX-CORE-820, Инструкция по установке и эксплуатации, Страница: 44 / 133

Поделиться
Скачать
Artesyn MITX-CORE-820 Скачать руководство пользователя страница 44

Hardware Preparation and Installation

MITX-CORE-820 Installation and Use (6806800M10H)

43

There are available spare parts of the components to be installed or replaced in the 
equipment warehouse. When the available spare parts are lacking, contact Artesyn 
Embedded Technologies for help in time. For details on how to get help from Artesyn 
Embedded Technologies, visit 

http://www.artesyn.com/computing/

Make sure that the new components are in good condition, without defects such as 
oxidation, chemical corrosion, missing components, or transportation damage. Read this 
document to familiarize yourself with the proper installtion and replacement procedures 
of the component, as well as to master the skills required by the operation. 

Check the environment
Make sure that the power supply, temperature, and humidity meet the operating 
requirements for the board and its components. For details, refer to the respective system 
documentation.

Prepare the parts and the tools
Prepare the components to be installed or replaced. When you hold or transport the 
components, use the special antistatic package. Prepare the cross screwdriver, screws, 
plastic supports, cooling gel, and ESD-preventive wrist strap.

Confirm installation or changing position
Confirm the position where MITX-CORE-820 will be installed.

If a serious problem occurs and cannot be solved when you install or replace the 
component, contact Artesyn Embedded Technologies for technical support.

Содержание MITX-CORE-820






































































































































Отзывы:

Нет отзывов