manualshive.com logo in svg

Artesyn MITX-CORE-820, Инструкция по установке и эксплуатации, Страница: 26 / 133

Поделиться
Скачать
Artesyn MITX-CORE-820 Скачать руководство пользователя страница 26

Safety Notes

MITX-CORE-820 Installation and Use (6806800M10H)

25

Improper cooling can lead to blade and system damage and can void the manufacturer’s 
warranty.
To ensure proper cooling and undisturbed airflow through the system always operate the 
system in a horizontal position. Do not obstruct the ventilation openings at the top, sides and 
back of the system. Keep the fresh air intake at the bottom-front side of the chassis completely 
clear. Make sure that the fresh air supply is not mixed with hot exhaust from other devices. 
Make sure that all slots are populated with either blades, filler blades, or dummy blades.

 Product 

Damage

High humidity and condensation on surfaces cause short circuits.
Do not operate the product outside the specified environmental limits. Make sure the product 
is completely dry and there is no moisture on any surface before applying power.

Expansion and FRU Replacement

 Product 

Damage

Bent pins or loose components can cause damage to the product, the backplane, or other 
system components.
Carefully inspect the product and the backplane for both pin and component integrity before 
installation.

 Personal 

Injury

During operation, hot surfaces may be present on the heat sinks and components of the 
product.
To prevent injury from hot surfaces do not touch any of the exposed components or heatsinks 
on the product when handling. Use the handle and face plate when removing the product 
from the enclosure.

Battery

 Data 

Loss

If the battery does not provide enough power anymore, the RTC is initialized and the data in 
the NVRAM is lost.
Replace the battery before seven years of actual battery use have elapsed.

Содержание MITX-CORE-820






































































































































Отзывы:

Нет отзывов