Artesyn MaxCore MC1600 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 118

Artesyn MaxCore MC1600 Скачать руководство пользователя страница 20

Safety Notes

18

MaxCore

™

MC1600 Extreme Edge Server Safety Notes Summary (6806870A04A

)

Personal Injury or System Damage

A top-heavy rack can tip, causing damage to equipment and injury to personnel.

If your system is the only one in the rack, make sure to mount the system in the lowest part of
the rack. If several systems are installed in one rack, start with the heaviest component at the
bottom. If the rack is equipped with stabilizing devices, make sure that they are installed and
extended so that the rack is secure. Then proceed to mount or service the system.

Personal Injury or System Damage

When pulling the system out of the rack it can fall and cause injuries.

Pull out the system cautiously.

Personal Injury

The system is heavy and improper handling may lead to muscle strain or back injury.

System Damage

During the course of handling, shipping and assembly, pins, mounting screws, fans and other
items can become loose or damaged.

Do not operate a damaged system, this can cause damage to devices that interfere with it.

Personal Injury

High leakage current can be hazardous and cause injury.

Locate the caution label near the grounding studs (may vary from system to
system) and make an earth ground connection before connecting power to the
system.

System Damage

Wrong jumper settings can make the system inoperable. Therefore, never change the settings
of the jumpers.

«
...
18
19
20
21
22
...
»

Содержание MaxCore MC1600























































































































Отзывы:

Нет отзывов