Artel INFINITYLINK ILC205, Инструкция по установке и эксплуатации

Страница: 16 / 32

6 ILC205 Function Module Installation and Operations Manual
ILC205 Function Modules
Cabling the ILC205 Modules
This section describes how to cable the external connections of the ILC205 module, which can receive external
signals over its RJ45 connectors and SFPs. The SFPs, which can also be used for transmitting external signals,
can be optical (LC connectors) or electrical (RJ45 connectors). The cabling configuration that you use depends
on your application.
Figure 4. ILC205 RJ45 Connectors and SFP Sockets
Cabling the Data Input RJ45 Connections
Use Ethernet cables with RJ45 plugs to connect the module’s RJ45 connectors to the source or destination
devices.
Cabling the SFP Connections
When using optical SFPs, use a single mode fiber when connecting to the LC connectors of the SFPs.
To cable the optical connections, perform the following tasks:
1. Remove the SFP safety plug that protects the TX/RX ports.
Cover any unused optical port to keep the port clean.
2. Connect the fiber optic cable between the SFP optical connectors on the module and the external source
or destination device.