Artel InfinityLink IL6000, Инструкция по установке и эксплуатации

Страница: 27 / 35

14 IL6000 Chassis Installation and Operations Manual
IL6000 Chassis
Powering Up and Monitoring the IL6000
The power supplies provide power to the installed modules through the backplane. The chassis front panel
status LEDs shown in Figure 8 indicate if the backplane, power supplies, and installed function modules are
operating correctly or if a problem exists.
Figure 8. IL6000 Front Panel Status LEDs
To power on and verify proper operation of the IL6000, perform the following steps:
1. From the back of the chassis, turn the power switches for both power supplies to ON (1).
2. From the front of the chassis, observe the status LEDs for proper operation as described in Table 4 .
Table 4. IL6000 Chassis Status LEDs
LED Description State
Status Operating status of the chassis backplane
and installed function modules. Off—Power to the chassis is unavailable. Check the power
source connection.
Green—Power is applied to the chassis and no alarm
condition exists with either of the power supplies, the
ILM121, or any function modules.
Yellow—Minor alarm condition exists. Power is applied to
the chassis and at least one minor and no major alarm
condition exists with one or more of the power supplies,
the ILM121, or function modules.
Red—Major alarm condition exists. Power is applied to the
chassis and at least one major alarm condition exists with
one or more of the power supplies, the ILM121, or function
modules.
Status LEDs