Thank you for purchasing the STOL. The STOL is a Short Take-Off and Landing airplane. It uses leading
and trailing edge flaps and also features a drop bay. The STOL is fitted with a powerful brushless motor
and Li-Po battery giving good performance and control with high stability.
The RTF version includes: 2.4GHz transmitter and receiver, ESC, motor, batteries, servos and charger.
The PNP version includes: ESC, motor and servos.
You will need to add a suitable transmitter, receiver and battery pack.
STOL Features:
1. Leading and trailing edge flaps.
2. Drop bay with parachuting figure.
3. Large tyres for landing on rough ground or grass.
4. Tough, coloured EPO airframe for durability.
5. Powerful brushless motor.
1. This model is not a toy, and is only suitable for responsible pilots.
Please keep in mind that you are responsible for the safe operation of this model and any damage or harm
that may be caused due to improper usage.
2. Please setup this model correctly according to instructions and make sure that
all body parts are kept away from any rotating parts to avoid personal injury or
damage to your model.
3. The user bears full responsibility for proper operation and use of this model.
Art-Tech or any of its distributors can not be held responsible for any liablity or loss
due to improper operation.
4. You must read and fully understand this manual before attempting to fly your model.
Wingspan: 1254mm (49.4”)
Length: 988mm (38.9”)
Height: 412mm (16.2”)
Weight: 1440g (50.8oz)
Wing Area: 23.6dm
Wing Loading: 61g/dm
Brushless Motor: ST3511-760KV
ESC: 30A Brushless
Servos: 9g x 7
RC System: EFLY-Bll 6CH 2.4GHz (RTF Version Only)
Battery: 11.1v 1800mAh Li-Po (RTF Version Only)
