ARS Automation FlexiBowl 350, Инструкция по эксплуатации

Страница: 17 / 84

2-7
FlexiBowl
®
- models 350 - 500 - 650 - 800
CHAPTER 2 - General preliminary information
2.10 Warranty
the full warranty terms are included in the sales contract.
The conditions set forth in the sales contract (if different) have priority over the contents of this section.
The warranty
is subject to the following general conditions:
• opening of packaging and installation must be carried out in the presence of technicians authorised by the
Manufacturer;
• the first start-up and positive testing of the installed machine must be done in the presence and under the guidance
of the Manufacturer’s technicians; the machine’s installation/test report must be filled in.
• the machine must be used within the limits declared in the contract and specified in the technical documentation.
• maintenance must be carried out within the times and in the ways indicated in the manual, using original spare parts
arS S.r.l. and entrusting the operations to qualified staff.
The warranty shall be rendered null and void in the event of:
• failure to follow the safety regulations ;
• failure by the user to request any authorisations required by the applicable regulations for use ;
• installation and use of the machine in unsuitable environments ;
• removal or tampering of the control and safety devices (guards, photocells, sensors, micro switches, etc.);
• changes to the safety conditions established by the Manufacturer in the machine management software;
• misuse of the machine;
• use of the machine by untrained and/or unauthorised staff or failure to comply with the skills of the various operators,
as indicated in the manual;
• modifications or repairs made by the user without written authorisation from the Manufacturer;
• tampering of the machine’s electrical or compressed air circuits;
• partial or total failure to comply with the instructions;
• power supply faults (electrical, compressed air, etc.);
• failure to implement the machine’s maintenance plan ;
• use of non-original spare parts or incorrect order for them;
• disposal of the machine not in compliance with the regulations in force;
• exceptional events such as floods, fire (if not caused by the machines).
important!
Further details may be contained in the sales contract.
The conditions set forth in the sales contract (if different) have priority over the contents of this section.