ARS Automation FlexiBowl 350, Инструкция по эксплуатации

Страница: 16 / 84

2-6
Instructions for use and warnings
CHAPTER 2 - General preliminary information
2.9 User’s safe area
The zones around the machine are divided as follows:
term Description
Control zones
These are the zones where the user and the other operators can control the machine’s cyclic
functions (
“operator station” ), in both automatic mode and semi-automatic mode, with the
control panels or to perform manual operations.
Maintenance/
adjustment
zones
These are the zones where the mechanical maintenance technicians can carry out maintenance
work or adjustments. These zones are considered risky and not accessible during normal machine
operation. Operators must be fully aware of the safety warnings and personal protective
equipment to be worn.
Danger zones
These are any zones within (or around) the machine where there are residual risks that can cause
harm to people. In these zones, access is forbidden to everyone during machine operation.
The hazards and risks in these zones are protected, as much as possible, with guards (casings, doors) and with safety
devices (sensors, micro switches, light curtains) which, if activated, completely shut down the machine.
However, when the machine is running, it is strictly forbidden to work in the danger zones as some of the risks might not
have been completely eliminated.