5300 Series
TECSource
User’s Manual · Page 29
External Fan Control
The
TECSource
has a built-in user adjustable 4-12V DC power supply designed
to provide up to 350mA to an external fan, such as those built into the
240
Series
LaserMounts
. When using the
TECSource
with mounts that require a
fan, no additional external power supply is needed, and the Arroyo 126xB series
cables all include the wiring to connect the fan power to the mount.
Fan control is setup in the menu using the
Ext Fan
,
Ext Fan Pwr
,
Ext Fan
Mode
, and
Ext Fan Off
settings.
Ext Fan
can be set to
Off
,
Slow
,
Medium
,
Fast
, or
Custom
. When set to
Off
, the
fan power is never turned on.
Slow
,
Medium
, and
Fast
correspond to 9V, 10.5V,
and 12V. To select a different voltage, choose the
Custom
setting and then
adjust the
Ext Fan Pwr
menu item to the desired voltage, from 4.0V to 12.0V.
The fan on/off mode can be controlled using the
Ext Fan Mode
setting. There
are five modes:
Auto
Fan is turned on whenever the TEC output is on, and turns off when the
TEC output is turned off.
On
Fan is always on.
Delay
Similar to the
Auto
mode, the fan is turned on whenever the TEC output
is on, but when the TEC is turned off, the fan will remaining running for
an addition number of minutes as defined by the
Ext Fan Off
setting.
Cool
Fan is turned on whenever the TEC output is on and cooling, off
otherwise.
Heat
Fan is turned on whenever the TEC output is on and heating, off
otherwise.
Содержание TECSource 5305
Страница 1: ......
Страница 35: ...5300 Series TECSource User s Manual Page 35...
Страница 43: ...5300 Series TECSource User s Manual Page 43 NOTES...