Arroyo Instruments TECPak 585 Series, Руководство пользователя, Страница: 4 / 40

Page 4 · TECPak User’s Manual
this cable, with tinned ends for soldering into custom solutions, is
available as p/n
1261B .

1262B TECSource Cable, 10A, 2m
Similar to the 1260B cable, but adds wiring for 4-wire RTD sense, and
therefore only needed for RTD applications. Also adds 10 Amp
operating capability. A pigtailed version of this cable, with bare ends for
soldering into custom solutions, is available as p/n
1263B .
 Pak Series Rack Mount Kit, 3 or 5 units (p/n 1402-RM)
For installing your TECPak or LaserPak into a standard 19” rack. The
kit accepts either 3 units for a 2U installation, or 5 units for a 3U
installation.

10k Ω Thermistor (p/n 1600)
Accurate to ±0.2°C.
 RS-232 NULL Cable, 3m (p/n 1200-NULL)
 USB Cable, 3m (p/n 1201)
Safety Terms and Symbols
The following safety-related terms are used in this manual:
 Warnings (noted by the WARNING heading) explain dangers that
could result in physical injury or death;
 Cautions (noted by the CAUTION heading) explain conditions that
could result in damage to the instrument, other equipment, or your
device.
 Notes (noted by the NOTES heading) are not safety-related, and are
intended simply to point out important information.
If, at any time, any of the following conditions exist, or are suspected of existing,
discontinue use of the unit until it can be inspected by qualified service
personnel:
 Visible damage to the unit, including damage or stress caused during
product shipment;
 Storage of the unit outside the standard storage temperature or
humidity rating, or prolonged storage under harsh conditions;
 Failure to operate properly.
If needed, contact your distributor or Arroyo Instruments for service or repair to
ensure the safety of the product is maintained.