Arroyo Instruments TECPak 585 Series, Руководство пользователя

Страница: 32 / 40

Page 32 · TECPak User’s Manual
Connecting to the Analog Interface
Connecting to the Analog Interface is very straightforward. Because the inputs
and outputs are buffered, you do not need any external filters or buffers, unless
your application requires it. The logic level interfaces are all high impedance, as
is the Analog Set Point Input. The Analog Monitor Output is an op-amp driven
through a 1k Ω resistor to protect against output shorting.
A typical application might look like this:
On/Off Control
On/Off Status
Stable Status
DAC
ADC
CPU or
I/O Board
TECPak
Analog
Interface
Set Point
Monitor
Ground Ground