Arroyo Instruments TECMount 286, Руководство пользователя

Страница: 10 / 22

286 TECMount User’s Manual · Page 9
Temperature Controller Interface
17W2
Pin Description
A1 TE +
A2 TE –
1 Int (shorted to Interlock – )
2 Vsense TE +
3 Sensor –
4
5 No connection
6 Aux Sensor –
7 Fan +
8 Fan – / Interlock –
9 Vsense TE –
10 Remete Sensor –
11 Remete
12 n/c
13 EGND (Case)
14 Aux
15 Fan – / Interlock –
17W2 Connector Pin-Out 17W2 Male
Interlock and Fan Pins
Interlock – and Fan – share a pin, and the same signal is present on both pins 8
& 15. In addition, because Int is shorted to Interlock – inside the mount,
pins 1, 8, & 15 are effectively the same on the
286 connector.
Auxiliary & External Sensor Interface
Phoenix Pin Description
1 Auxilliary
2 Auxilliary Sensor –
3 External
4 External Sensor –
Phoenix 4-Pin Connector Pin-Out
Sensor Polarity and 4-Wire Connections
While the thermistor and RTD inputs are not polarized, when using a 4-wire RTD
connection to the
286-xx-150 mount, it is important to properly connect the
polarity of the sense wires to the sensor. Pins 4 and 11 should be one polarity
(+) and pins 3 and 10 should be the opposite polarity ( – ). If polarities are not
matched, the instrument will indicate a sensor error.
12
3
4
5
6
7
8
A1
A2
91
0
1
1
1
2
1
3
1
4
1
5
TE –
TE +
Int
Vsense TE +
Sensor –
n/c
Aux Sensor –
Fan +
Vsense TE –
Fan – / Interlock –
Remote Sensor –
Remote
n/c
EGND (Case)
Aux
Fan – / Interlock –