Page 4 · 286
TECMount
User’s Manual
Installation and Use
Consider how you plan to integrate the fixture into your application:
Set it on your bench or optical table?
Bolted to an optical table?
Mount the cold plate horizontal or vertical?
Mount to other instrument such as an integrating sphere?
The
286
TECMount
comes standard with the
M Series
accessory kit, which you
can use to do many of these configurations. There are also several ¼”-20
mounting holes on the sides and face of the fixture, and four 8-32 mounting
holes on the bottom of the fixture (the same holes used by the feet or posts).
Setting on a bench or optical table
This is the simplest of configurations. Using the MP-2.00 posts, thread them into
the four 8-32 holes on the bottom of the fixture. Next, using the 1/2”x 8-32
screws, a lock washer, and a flat washer, mount the feet to the bottom of each of
the posts.
286 mounted on posts and feet
