background image

ACCESSORIES....

     A07

* Some drilling required to fi t buildings without mid-wall bracing.

Model No. SS404

•  Makes 8" to 12" (20,3-30,5 cm) 

   wide shelves in any length.

•  Brackets, braces,

   hardware included.

   Lumber is not included.

Model No. SS900-B

•  Grey color

•  3 shelves

•  Holds up to 85 lbs. (38 kg)

   (even weight distribution)

Heavy-duty, galvanized steel shelf units help organize storage 

space. They easily mount on the wall or sit on the fl oor. Fits all 

Arrow buildings.*

SHELF UNITS

ATTIC KIT / WORKBENCH KIT

Model No. AT101

Heavy-duty galvanized steel bars that

fi t all 10' (3,0 m) wide Arrow buildings. 

They install quickly and easily to 

help organize space and create 

more useable space as an attic or

workbench. Will hold up to 250 lbs.

(113 kg) evenly distributed.

Some drilling required to fi t buildings without mid-wall bracing.

Model No. AK100

New concrete anchor system permits

anchoring any size Arrow building

directly to a concrete slab. Each kit

contains heavy-duty, hot-dipped

galvanized steel corner gussets and

perimeter clips which fi t over the fl oor

frame and lag bolt into a concrete slab.

Full assembly instructions and a 1/4"

masonary drill bit are included.

TOOL HANGING RACK

Model No. TH100

The perfect tool organizer. Twin

25 1/2" (64,8 cm) steel channels 

plus fi ve heavy-duty snap-in 

hangers and a small tool holder for

screwdrivers, pliers, etc. Holders

slide along channel for fully

adjustable spacing. Great for

garage, basement, or the back

of any door. Fits all Arrow

storage buildings.

ROOF STRENGTHENING 

(heavy snow load) KITS 

Extra roof beams and gable braces 

designed for added protection against 

heavy snow accumulation. Increases 

the strength of your roof. 

ANCHOR KITS 

Model No. AK4

Anchor Kit contains heavy-duty steel

augers, 60' (18 m) of steel cable and 

4 cable clamps. No digging or concrete 

pouring, just insert cable under roof,

over roof beams, into augers and twist

augers into the ground. For buildings

larger than 10'x9' (3,0 m x 2,6 m), use 2 kits.

FLOOR FRAME KITS

  

MODELS FB47410, FB5465, FB106-A

FB109-A and FB1014-A

A simple new fl oor frame system made of heavy-duty, hot-dipped 

galvanized steel.  Use as base for plywood, sand or stone.

Model No. AK600

Earth Anchor Kit anchors any size 

Arrow building to the ground.  

Each kit contains heavy duty, 

hot-dipped galvanized steel 

corner gussets and 4 earth anchors.

BEFORE

AFTER

Содержание MRD108

































Отзывы: