Array electronic AF-10MR-A, Руководство пользователя

Страница: 35 / 122

C
hapter
Ⅲ
G
eneral
D
escriptions
for
F
unction
B
locks
2. If Input TRG changes from Status 1 to Status 0 again, the timer is activated
again.
3. Before the set time T is over, the timer and output can be reset via R (Reset)
input.
4. This function is applicable to the lighting of staircase, the control of barriers
in a car park, the control of water throttling valve, etc.
5. The assigned range of T is 0.01 ~ 99.99, and the time units can be set respec-
tively to hour (H), minute (M) and second (S). Its time accuracy can reach
0.5‰.
3.2.3 PLR
Pin Description
TRG
Trigger input (TRG) makes the output On
and Off
Input R
The output Q is reset via R (Reset input)
(Q=0, R takes
priority over TRG)
Output Q
Every time TRG changes from 0 to 1, the
status of Q will change (i.e. from Status 0
to Statues 1 or vice versa)
Time Sequence Frame:
25
Line diagram/Symbol in FAB
Input